You move your finger across the touchpad and nothing happens. The cursor sits still, or it jumps around the screen, or it only works when it feels like it. A dead touchpad is one of the most annoying laptop faults because it takes away the one thing you use every minute — and most people assume it means an expensive repair. The good news is that most touchpads stop working for simple reasons: a key was pressed by accident, a setting was changed by a Windows update, or a driver needs a refresh. In this guide, we explain why your laptop touchpad stops working and walk you through 10 fixes that work in 2026, starting with the easiest checks first.
Why Does My Laptop Touchpad Stop Working?
A laptop touchpad is a small flat sensor under your palms that tracks your finger and turns it into cursor movement. It can stop working for three broad reasons. The first is that it has been switched off — most laptops have a function key or a setting that disables the touchpad, and it is very easy to press it by accident. The second is software: a Windows update, a corrupted driver or a wrong setting can leave the touchpad unresponsive even though the hardware is fine. The third is hardware: a worn-out ribbon cable, a swollen battery pressing up from underneath, or liquid damage. Work through the fixes below in order — in most cases, one of the first five will bring the touchpad back to life.
1. Press the Touchpad On/Off Key
The quickest fix costs nothing, and it solves the problem more often than any other. Most laptops have a function key that turns the touchpad on and off — usually one of the F keys (F5, F6, F7 or F9 are common) with a small touchpad icon printed on it. Hold down the Fn key and press that F key once, then try the touchpad. On some HP and Lenovo models, double-tapping the top-left corner of the touchpad itself switches it on and off — look for a small light or dot in that corner. Some laptops also have a dedicated touchpad button just above the touchpad. If the touchpad starts working after this one press, it was simply switched off by accident — and you have just saved yourself a repair bill.
2. Check the Touchpad Settings in Windows
If the key did not help, the touchpad may have been turned off in Windows settings — a Windows update sometimes does this. Press the Windows key, type "touchpad" and open Touchpad settings (or go to Settings, then Bluetooth & devices, then Touchpad). Make sure the Touchpad switch at the top is turned on. While you are there, check the cursor speed: if it is set to the very lowest, the cursor will barely move and the touchpad can feel dead. Set it to the middle and test again. Also check the "Leave touchpad on when a mouse is connected" box — if it is unticked, Windows disables the touchpad the moment a USB or Bluetooth mouse is plugged in, which is a common surprise. If the laptop also freezes while you work, read our guide on laptop hanging and freezing fixes — a frozen system can look exactly like a dead touchpad.
3. Restart the Laptop
A restart clears temporary glitches in the driver and in Windows itself, and it fixes a surprising number of touchpad faults. Since you cannot use the touchpad, restart with the keyboard: press Ctrl + Alt + Delete, then use the Tab key to reach the power icon in the bottom-right corner and press Enter, then choose Restart. Or press the Windows key + X, then press U, then R. Wait for the laptop to start up fully before testing the touchpad — give it a minute after the desktop appears, because Windows is still loading drivers in the background. If the touchpad works after a restart but stops again later, note when it stops: if it always happens after the laptop wakes from sleep, the driver or power settings are the likely cause, and fix 5 or 7 below should sort it out.
4. Test With an External Mouse and Check for a Full Freeze
Plug in a USB mouse, or connect a Bluetooth mouse, and see whether the cursor moves with it. If the external mouse works fine, the problem is limited to the touchpad itself — a setting, a driver or the touchpad hardware. If the external mouse does not work either, the whole system may be frozen rather than the touchpad being broken: press Ctrl + Shift + Esc to open Task Manager and check whether it responds, and read our guide on laptop hanging and freezing fixes. While the mouse is connected, also test the touchpad again with the mouse unplugged — some laptops disable the touchpad when a mouse is present, and unplugging it may bring the touchpad straight back. Make a note of the results — a repair shop will ask exactly this question.
5. Update or Reinstall the Touchpad Driver
The driver is the software that lets Windows talk to the touchpad, and a corrupted or out-of-date driver is the most common software cause of a dead touchpad. Press the Windows key + X and choose Device Manager. Expand "Mice and other pointing devices" (or "Human Interface Devices"), right-click on the touchpad entry — it may be called Synaptics, ELAN, HID-compliant touch pad or your laptop brand's name — and choose Update driver, then "Search automatically for drivers". If Windows says the best driver is already installed, right-click the entry again and choose Uninstall device, tick "Attempt to remove the driver for this device" if it appears, then restart the laptop — Windows will install a fresh copy of the driver when it starts up again. Never download a touchpad driver from a random driver site: get it from your laptop manufacturer's website — HP, Dell, Lenovo and the rest all have a free support page where you type in your model number.
6. Roll Back a Recent Driver or Windows Update
If the touchpad stopped working right after a Windows update, the update itself is the prime suspect. In Device Manager, right-click the touchpad entry, choose Properties, go to the Driver tab, and click "Roll Back Driver" if it is available — this returns the driver to the version that worked before. If that button is greyed out, undo the Windows update instead: go to Settings, then Windows Update, then Update history, then Uninstall updates, and remove the most recent update, then restart. If the touchpad works again, pause Windows updates for a week (Settings, then Windows Update, then Pause updates) so the same update does not come back straight away. Check your laptop manufacturer's support page for a newer touchpad driver before you let updates run again.
7. Install All Windows Updates and Your Laptop's Own Software
Sometimes the fix is the opposite of the one above: an old driver or an old version of Windows is the problem, and an update repairs it. Go to Settings, then Windows Update, and install every update shown, including optional driver updates under "Advanced options" and "Optional updates", then restart. Next, check whether your laptop has its own update program — HP Support Assistant, Lenovo Vantage, Dell SupportAssist or MyASUS — and run it: these tools often carry touchpad firmware updates that Windows Update never offers. While you are there, check for a BIOS update for your model — manufacturers regularly release BIOS updates that fix touchpad and keyboard faults. Only install a BIOS update with the laptop plugged into mains power, and do not switch it off during the update — interrupting it can stop the laptop from starting at all.
8. Adjust Sensitivity, Palm Rejection and Gestures
If the touchpad moves but behaves badly — the cursor jumps, clicks things by itself, or stops responding while you type — the problem is usually a sensitivity or palm-rejection setting, not a broken touchpad. Open Touchpad settings (Settings, then Bluetooth & devices, then Touchpad) and try these changes one at a time. First, set "Touchpad sensitivity" to Medium if it is on Low or High. Second, turn off "Tap with a single finger to single-click" and test whether accidental taps stop. Third, look for a palm-rejection or "PalmCheck" setting in the advanced touchpad software (Synaptics or ELAN control panel) and set it to the middle — too strong, and the touchpad ignores your finger while you type; too weak, and your palm moves the cursor. Fourth, turn off three- and four-finger gestures to rule out a gesture being misread as a fault. Test after each change so you know which setting was the culprit.
9. Clean the Touchpad and Check for Moisture or Damage
A touchpad is a capacitive sensor, so anything on its surface can confuse it. Switch the laptop off, then wipe the touchpad gently with a soft, slightly damp cloth — not a wet one — and dry it fully. Grease from food, hand cream, a sticky screen protector or a thick skin over the touchpad can all stop it responding. Never spray cleaner directly onto the touchpad. Check for moisture: if you spilled a drink near the laptop, even a small amount can seep under the touchpad and short its sensor — switch the laptop off, unplug it, turn it upside down to drain, and leave it to dry for at least 24 hours before switching it on again. If the touchpad feels raised, clicks oddly or the laptop's bottom panel is bulging, stop using it straight away — read our guide on laptop battery draining fast fixes and get the battery checked, because a swollen battery pressing up from underneath is a fire risk.
10. Test the Touchpad in the BIOS and Check the Hardware
If none of the software fixes worked, find out whether the touchpad is a hardware fault. Restart the laptop and press the BIOS key as it starts — usually F2, F10, Del or Esc, depending on the brand — to enter the BIOS or UEFI setup screen. On many laptops the touchpad works in this screen: if you can move the pointer here but not in Windows, the hardware is fine and the fault is in Windows or the driver, so a Windows reset or a clean driver install from the manufacturer should fix it. If the touchpad does not respond in the BIOS either, the fault is almost certainly hardware — a loose or worn ribbon cable connecting the touchpad to the motherboard, or a failed touchpad itself. Replacing the touchpad typically costs £40 to £90 for the part, plus £30 to £60 fitting at a UK repair shop. If the laptop also refuses to charge, our laptop not charging fixes may help — a power fault and a touchpad fault together often point to the same internal connection.
When to Seek Professional Repair
Stop troubleshooting and book a repair if the touchpad does not work in the BIOS either, which points to a hardware fault; if the touchpad is raised, the bottom panel is bulging or the trackpad clicks oddly, which points to a swollen battery; if the laptop suffered a liquid spill and the touchpad never came back after drying; or if the touchpad works only when you press down hard on one corner, which usually means a loose cable. Check your warranty first — touchpad faults in the first year are often covered, and opening the laptop yourself could void it. For out-of-warranty laptops, a touchpad replacement typically costs £70 to £150 fitted, and a ribbon cable repair £40 to £80. If the repair costs more than half the price of a replacement laptop, it is usually better to replace it — check our guide to the best laptops for students in the UK in 2026 for good-value replacements.
FAQs
Why is my laptop touchpad not working suddenly?
It usually switched itself off by accident, or a Windows update changed a setting or a driver. Start with fix 1: press Fn plus the touchpad function key. Then check Touchpad settings in Windows to make sure the touchpad is switched on and "Leave touchpad on when a mouse is connected" is ticked. If it stopped right after an update, roll the driver back (fix 6).
How do I turn my laptop touchpad back on?
Hold the Fn key and press the function key with the touchpad icon on it — usually F5, F6, F7 or F9. If that does not work, go to Settings, then Bluetooth & devices, then Touchpad, and switch the Touchpad toggle on. On some HP and Lenovo models, double-tap the top-left corner of the touchpad itself to switch it on.
Why does my touchpad work sometimes and then stop?
This is usually a driver or power problem. It often happens after the laptop wakes from sleep, when Windows fails to reload the touchpad driver, or when a background program uses all the processor power. Update or reinstall the touchpad driver (fix 5), install all Windows updates (fix 7), and if it only happens after sleep, change the touchpad's power setting in Device Manager so Windows cannot switch it off to save power.
How much does it cost to fix a laptop touchpad in the UK?
If it is a software or driver fault, it costs nothing to fix at home with the steps above. A touchpad replacement at a repair shop typically costs £70 to £150 fitted, depending on the model. A loose ribbon cable repair costs £40 to £80. Always get a quote first, and check your warranty — faults in the first year are often covered.
Final Thoughts
A laptop touchpad that stops working is usually fixed by pressing the touchpad function key, switching it back on in Windows settings, restarting the laptop, or updating or reinstalling the driver. Only when the touchpad does not respond in the BIOS, the panel is bulging, or there was a liquid spill should you suspect a hardware fault — then a professional repair is the sensible next step. If your laptop is also freezing or running slow in general, read our guide on laptop hanging and freezing fixes before you decide whether to repair or replace it.
